Extreme Environments Research Articles

Neural processing without O2 and glucose delivery: from the pond to the clinic.

Neuronal activity requires a large amount of ATP, leading to a rapid collapse of brain function when aerobic respiration fails. Here, we summarize how rhythmic motor circuits in the brainstem of adult frogs, which normally have high metabolic demands, transform to produce proper output during severe hypoxia associated with emergence from hibernation. We suggest that general principles underlying plasticity in brain bioenergetics may be uncovered by studying non-mammalian models that face extreme environments, yielding new insights to combat neurological disorders involving dysfunctional energy metabolism.

Alignment Controlled Aramid Nanofiber‐Assembled Films

AbstractAramid nanofibers (ANFs) are a strong and heat‐resistant nanomaterial that can be isolated from commercial para‐aramid fibers, which allow a bottom‐up self‐assembly to form ordered macroscale structures like ANF films. However, the anisotropic nature of high aspect ratio ANFs is not fully exploited when fabricating ANF films for the optimal mechanical properties. In this research, direct ink writing (DIW) is applied to produce ANF‐assembled films with arbitrary shapes, and the shear‐induced alignment of ANFs can follow the printing path direction. Therefore, controlled alignment of ANFs following the computer‐programmed printing pattern is achieved by DIW, which provides a path for the application of topology and nanofiber alignment optimization in nanofiber‐assembled films. In addition, the resulting DIW ANF films exhibit outstanding Young's modulus of 8.39 GPa, tensile strength of 198 MPa, and tensile toughness of 19.4 MJ m−3 in the alignment direction, together with a wide working temperature range up to 440 °C without losing 50% of its room temperature storage modulus. Moreover, the demonstrated self‐joining ability, rollability, and lamination processability of the DIW ANF films expand their potential applications toward high‐temperature ultrathin tubes, substrates for flexible printed circuit boards, and three‐dimensional all‐ANF lightweight structural parts in extreme environments.

Chromosome-level genome assembly of Hippophae tibetana provides insights into high-altitude adaptation and flavonoid biosynthesis

BackgroundAs an endemic shrub of the Qinghai-Tibetan Plateau (QTP), the distribution of Hippophae tibetana Schlecht. ranges between 2800 and 5200 m above sea level. As the most basal branch of the Hippophae genus, H. tibetana has an extensive evolutionary history. The H. tibetana is a valuable tree for studying the ecological evolution of species under extreme conditions.ResultsHere, we generated a high-quality chromosome-level genome of H. tibetana. The total size of the assembly genome is 917 Mb. The phylogenomic analysis of 1064 single-copy genes showed a divergence between 3.4 and 12.8 Mya for H. tibetana. Multiple gene families associated with DNA repair and disease resistance were significantly expanded in H. tibetana. We also identified many genes related to DNA repair with signs of positive selection. These results showed expansion and positive selection likely play important roles in H. tibetana’s adaptation to comprehensive extreme environments in the QTP. A comprehensive genomic and transcriptomic analysis identified 49 genes involved in the flavonoid biosynthesis pathway in H. tibetana. We generated transgenic sea buckthorn hairy root producing high levels of flavonoid.ConclusionsTaken together, this H. tibetana high-quality genome provides insights into the plant adaptation mechanisms of plant under extreme environments and lay foundation for the functional genomic research and molecular breeding of H. tibetana.

Genome-wide analysis to uncover how Pocillopora acuta survives the challenging intertidal environment.

Characterisation of genomic variation among corals can help uncover variants underlying trait differences and contribute towards genotype prioritisation in coastal restoration projects. For example, there is growing interest in identifying resilient genotypes for transplantation, and to better understand the genetic processes that allow some individuals to survive in specific conditions better than others. The coral species Pocillopora acuta is known to survive in a wide range of habitats, from reefs artificial coastal defences, suggesting its potential use as a starter species for ecological engineering efforts involving coral transplantation onto intertidal seawalls. However, the intertidal section of coastal armour is a challenging environment for corals, with conditions during periods of emersion being particularly stressful. Here, we scanned the entire genome of P. acuta corals to identify the regions harbouring single nucleotide polymorphisms (SNPs) and copy number variations (CNVs) that separate intertidal colonies (n = 18) from those found in subtidal areas (n = 21). Findings revealed 74,391 high quality SNPs distributed across 386 regions of the P. acuta genome. While the majority of the detected SNPs were in non-coding regions, 12% were identified in exons (i.e. coding regions). Functional SNPs that were significantly associated with intertidal colonies were found in overrepresented genomic regions linked to cellular homeostasis, metabolism, and signalling processes, which may represent local environmental adaptation in the intertidal. Interestingly, regions that exhibited CNVs were also associated with metabolic and signalling processes, suggesting P. acuta corals living in the intertidal have a high capacity to perform biological functions critical for survival in extreme environments.

A Multi-Stage Constraint-Handling Multi-Objective Optimization Method for Resilient Microgrid Energy Management

In recent years, renewable energy has seen widespread application. However, due to its intermittent nature, there is a need to develop energy management systems for its scheduling and control. This paper introduces a multi-stage constraint-handling multi-objective optimization method tailored for resilient microgrid energy management. The microgrid encompasses diesel generators, energy storage systems, renewable energy sources, and various load types. The intelligent management of generators, batteries, switchable loads, and controllable loads ensures a reliable power supply for the critical loads. Beyond operational costs, our model also considers grid dependency as a key objective, making it particularly suited for energy management in extreme environments such as islands, border regions, and military bases. Managing complex controls of generators, batteries, switchable loads, and controllable loads presents challenging constraints that the management strategy must meet. To tackle this challenge, we propose an multi-objective optimization algorithm with multi-stage constraint-handling strategy to handle the high-dimensional complex constraints of the resilient energy management problem. Our proposed approach demonstrates superior performance compared to nine leading constrained multi-objective optimization algorithms across various test scenarios. Furthermore, the benefits of our method become increasingly evident as the complexity of the problem increases. Compared to the classical NSGA-II, the proposed NSGA-II-MC method achieved a 49.7% improvement in the Hypervolume metric on large-scale problems.

Magnetic multilayer hydrogel oral microrobots for digestive tract treatment

Oral administration is a convenient drug delivery method in our daily lives. However, it remains a challenge to achieve precise target delivery and ensure the efficacy of medications in extreme environments within the digestive system with complex environments. This paper proposes an oral multilayer magnetic hydrogel microrobot for targeted delivery and on-demand release driven by a gradient magnetic field. The inner hydrogel shells enclose designated drugs and magnetic microparticles. The outer hydrogel shells enclose the inner hydrogel shells, magnetic microparticles, and pH neutralizers. The drug release procedure is remotely implemented layer-by-layer. When the required gradient magnetic field is applied, the outer hydrogel shells are destroyed to release their inclusions. The enclosed pH neutralizers scour the surrounding environment to avoid damaging drugs by the pH environment. Subsequently, the inner hydrogel shells are destroyed to release the drugs. A set of experiments are conducted to demonstrate the wirelessly controllable target delivery and release in a Petri dish and biological tissues. The results demonstrated attractive advantages of the reported microrobot in microcargo delivery with almost no loss, remote controllable release, and drug protection by the pH neutralizers. It is a promising approach to advance next-generation precision oral therapies in the digestive system.

Toward Healthy Underground Spaces: A Review of Underground Environmental Design Factors and Their Impacts on Users' Physiological and Psychological Health.

This study aims to review and synthesize what design factors are associated with the physiological and psychological health of occupants in underground spaces. The development of underground spaces offers options to global challenges, such as traffic congestion, urban overcrowding, the revitalization of dormant underground areas, disaster mitigation, and adaptation to extreme environments. Despite these advantages, concerns persist about potential adverse effects on human health in these environments. This situation underlines the necessity of systematically identifying concerns and perceptions related to health in underground spaces. A narrative literature review was conducted to examine the relationship between design factors and health factors across 21 empirical studies. Based on the review of the identified literature, a relationship diagram was developed to depict the interconnections between the identified design and health factors. The analysis identified design factors related to the air, sound, light, nature, transport, and spatial context of underground spaces, each of which exerted relationships with occupants' physiological and psychological health factors. The relationship diagram indicated that the psychological factor "feeling of confinement" was mentioned most frequently, suggesting that it is one of the most extensively researched factors in this context. The relationship diagram aims to bridge the existing knowledge gap and set the stage for future research endeavors. The ultimate goal is to refine urban living standards by leveraging the potential of underground spaces while ensuring health and well-being.

Differential Mitochondrial Genome Expression of Three Sympatric Lizards in Response to Low-Temperature Stress

Ecological factors related to climate extremes have a significant influence on the adaptability of organisms, especially for ectotherms such as reptiles that are sensitive to temperature change. Climate extremes can seriously affect the survival and internal physiology of lizards, sometimes even resulting in the loss of local populations or even complete extinction. Indeed, studies have shown that the expression levels of the nuclear genes and mitochondrial genomes of reptiles change under low-temperature stress. At present, the temperature adaptability of reptiles has rarely been studied at the mitochondrial genome level. In the present study, the mitochondrial genomes of three species of lizards, Calotes versicolor, Ateuchosaurus chinensis, and Hemidactylus bowringii, which live in regions of sympatry, were sequenced. We used RT-qPCR to explore the level of mitochondrial gene expression under low-temperature stress, as compared to a control temperature. Among the 13 protein-coding genes (PCGs), the steady-state transcript levels of ND4L, ND1, ATP6, and COII were reduced to levels of 0.61 ± 0.06, 0.50 ± 0.08, 0.44 ± 0.16, and 0.41 ± 0.09 in C. versicolor, respectively, compared with controls. The transcript levels of the ND3 and ND6 genes fell to levels of just 0.72 ± 0.05 and 0.67 ± 0.05 in H. bowringii, compared with controls. However, the transcript levels of ND3, ND5, ND6, ATP6, ATP8, Cytb, and COIII genes increased to 1.97 ± 0.15, 2.94 ± 0.43, 1.66 ± 0.07, 1.59 ± 0.17, 1.46 ± 0.04, 1.70 ± 0.16, and 1.83 ± 0.07 in A. chinensis. Therefore, the differences in mitochondrial gene expression may be internally related to the adaptative strategy of the three species under low-temperature stress, indicating that low-temperature environments have a greater impact on A. chinensis, with a small distribution area. In extreme environments, the regulatory trend of mitochondrial gene expression in reptiles is associated with their ability to adapt to extreme climates, which means differential mitochondrial genome expression can be used to explore the response of different lizards in the same region to low temperatures. Our experiment aims to provide one new research method to evaluate the potential extinction of reptile species in warm winter climates.

Exoskeletal trade-off between claws and carapace in deep-sea hydrothermal vent decapod crustaceans.

Limitations on energetic resources create evolutionary trade-offs, prompting us to investigate if investment in claw strength remains consistent across crustaceans living in diverse habitats. Decapod crustaceans living in deep-sea hydrothermal vents are ideal for this study due to their extreme environment. In this study, we investigated whether decapods (blind crab Austinograea sp. and the squat lobster Munidopsis lauensis) living in deep-sea hydrothermal vents prioritize investing in strong claws compared to the carapace, like coastal decapods. We analyzed exoskeleton morphology, mechanical properties, structures, and elemental composition in both the carapace and claws of four Decapoda species (two each from Brachyura and Anomura infraorders) in vent and coastal habitats. Coastal decapods had approximately 4 to 9 times more teeth on their claw cutting edge than the vent species. Further, only the coastal species exhibited higher firmness in their claws than in their carapaces. Each infraorder controlled exoskeletal hardness differently: Brachyura changed the stacking height of the Bouligand structure, while Anomura regulated magnesium content in the exoskeleton. The vent decapods may prioritize strengthening their carapace over developing robust claws, allocating resources to adapt to the harsh conditions of deep-sea hydrothermal vents. This choice might enhance their survival in the extreme environment, where carapace strength is crucial for protecting internal organs from environmental factors, rather than relying on the powerful claws seen in coastal decapods for a competitive advantage.

The Effects of Post Weld Heat Treatment on Microstructure and Mechanical Properties of API X70 Linepipe using Submerged Arc Welding

API X70 steel requires high strength and toughness for safety in extreme environments like high pressure and low temperature. Submerged Arc Welding (SAW ) is effective for manufacturing thick steel pipes. However, the welding heat input during SAW alters the microstructure and mechanical properties of the heat affected zone (HAZ). Therefore, investigating the correlation between microstructure and mechanical properties in welded X70 pipes is important to address potential degradation of HAZ and weld metal (WM). In this study, post weld heat treatment (PWHT) was performed to improve mechanical properties of HAZ and WM and to reduce residual stress caused by the welding process. We performed PWHT at 640°C for 15 hours and followed by air cooling. After heat treatment, we observed the microstructure through OM and SEM analysis, and investigated the mechanical properties through tensile test, hardness test, and Charpy impact test.

Ammonia-oxidizing archaea adapted better to the dark, alkaline oligotrophic karst cave than their bacterial counterparts

Subsurface karst caves provide unique opportunities to study the deep biosphere, shedding light on microbial contribution to elemental cycling. Although ammonia oxidation driven by both ammonia-oxidizing bacteria (AOB) and ammonia-oxidizing archaea (AOA) is well explored in soil and marine environments, our understanding in the subsurface biosphere still remained limited to date. To address this gap, weathered rock and sediment samples were collected from the Xincuntun Cave in Guilin City, an alkaline karst cave, and subjected to high-throughput sequencing and quantification of bacterial and archaeal amoA, along with determination of the potential nitrification rates (PNR). Results revealed that AOA dominated in ammonia oxidation, contributing 48–100% to the PNR, and AOA amoA gene copies outnumbered AOB by 2 to 6 orders. Nitrososphaera dominated in AOA communities, while Nitrosopira dominated AOB communities. AOA demonstrated significantly larger niche breadth than AOB. The development of AOA communities was influenced by deterministic processes (50.71%), while AOB communities were predominantly influenced by stochastic processes. TOC, NH4+, and Cl− played crucial roles in shaping the compositions of ammonia oxidizers at the OTU level. Cross-domain co-occurrence networks highlighted the dominance of AOA nodes in the networks and positive associations between AOA and AOB, especially in the inner zone, suggesting collaborative effort to thrive in extreme environments. Their high gene copies, dominance in the interaction with ammonia oxidizing bacteria, expansive niche breadth and substantial contribution to PNR collectively confirmed that AOA better adapted to alkaline, oligotrophic karst caves environments, and thus play a fundamental role in nitrogen cycling in subsurface biosphere.

Anticandidal Activity of a Siderophore from Marine Endophyte Pseudomonas aeruginosa Mgrv7

An endophytic symbiont P. aeruginosa-producing anticandidal siderophore was recovered from mangrove leaves for the first time. Production was optimal in a succinate medium supplemented with 0.4% citric acid and 15 µM iron at pH 7 and 35 °C after 60 h of fermentation. UV spectra of the acidic preparation after purification with Amberlite XAD-4 resin gave a peak at 400 nm, while the neutralized form gave a peak at 360 nm. A prominent peak with RP-HPLC was obtained at RT 18.95 min, confirming its homogeneity. It was pH stable at 5.0–9.5 and thermally stable at elevated temperatures, which encourages the possibility of its application in extreme environments. The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) against Candida spp. Were in the range of 128 µg/mL and lower. It enhanced the intracellular iron accumulation with 3.2–4.2-fold (as judged by atomic absorption spectrometry) with a subsequent increase in the intracellular antioxidative enzymes SOD and CAT. Furthermore, the malondialdehyde (MDA) concentration due to cellular lipid peroxidation increased to 3.8-fold and 7.3-fold in C. albicans and C. tropicalis, respectively. The scanning electron microscope (SEM) confirmed cellular damage in the form of roughness, malformation, and production of defensive exopolysaccharides and/or proteins after exposure to siderophore. In conclusion, this anticandidal siderophore may be a promising biocontrol, nonpolluting agent against waterborne pathogens and pathogens of the skin. It indirectly kills Candida spp. by ferroptosis and mediation of hyperaccumulation of iron rather than directly attacking the cell targets, which triggers the activation of antioxidative enzymes.

Anisotropic Semicrystalline Homopolymer Dielectrics for High-temperature Capacitive Energy Storage.

High-temperature dielectric polymers are in high demand for powering applications in extreme environments. Here, we have developed high-temperature homopolymer dielectrics with anisotropy by leveraging the hierarchical structure in semicrystalline polymers. The lamellae have been aligned parallel to the surface in the dielectric films. This structural arrangement resembles the horizontal alignment of nanosheet fillers in polymer nanocomposites andnanosheet-like lamellae in block copolymers, which has been proven to provide the optimal topological structure for electrical energy storage. The unique ordering of lamellae in our dielectric films endue a significantly increased breakdown strength and a reduced leakage current compared to amorphous films. This novel approach of enhancing the capacitive energy storage properties by controlled orientation of lamellae in homopolymer offers a new perspective for the design of high-temperature polymer dielectrics.

Effect of Cooling Rate on Microstructure and Mechanical Properties According to Heat Treatment Temperature of Inconel 625

Inconel 625 is typically used in extreme environments due to excellent mechanical properties such as high strength, corrosion resistance, abrasion resistance and low-temperature toughness. When manufacturing a hot forged flange with a thick and complex shape, the cooling rate varies depending on the location due to the difference in thermal gradient during the cooling process after hot forging. In this study, to evaluate the microstructure and mechanical properties of Inconel 625 according to the cooling rate, we performed heat treatment at 950°C, 1050°C, and 1150°C for 4 hours followed by water cooling. Additionally, temperature data for each location on the flange were obtained using finite element method (FEM) simulation for each heat treatment temperature, revealing a discrepancy in the cooling rate between the surface and the center. Therefore, the correlation between microstructure and mechanical properties according to cooling rate was investigated.

Design of refractory high entropy alloys for extreme environment by using CALPHAD

Design of refractory high entropy alloys for extreme environment by using CALPHAD

Nanoindentation responses of NiCoFe medium-entropy alloys from cryogenic to elevated temperatures

AbstractNiCoFe alloy, a medium-entropy alloy, shows potential for applications in extreme environments. However, there is a theoretical barrier concerning the unclear understanding of its high-temperature dislocation motion mechanism. The load response exhibits distinct signatures relevant to thermal activation, most notably a decrease in critical force (i.e., softening) from cryogenic to elevated temperatures, e.g., from 200 to 1000 K. The onset of plasticity is characterized by the nucleation of stacking faults and prismatic loops at low temperatures, whereas the surface nucleation of Shockley partial dislocations dominates plasticity at elevated temperatures. We show that thermal effects lead to non-uniform atom pile-ups and control the rate of phase transformation with increasing indentation depth. The findings in this work extend the understanding of the mechanical response of NiCoFe alloys under indentation at different temperatures, shedding light on the underlying dislocation motion mechanisms and surface deformation characteristics. The observed transformation-induced plasticity mechanism has implications for the properties of medium-entropy alloys and their potential applications in extreme environments.

Anisotropic Semicrystalline Homopolymer Dielectrics for High‐temperature Capacitive Energy Storage

High‐temperature dielectric polymers are in high demand for powering applications in extreme environments. Here, we have developed high‐temperature homopolymer dielectrics with anisotropy by leveraging the hierarchical structure in semicrystalline polymers. The lamellae have been aligned parallel to the surface in the dielectric films. This structural arrangement resembles the horizontal alignment of nanosheet fillers in polymer nanocomposites and nanosheet‐like lamellae in block copolymers, which has been proven to provide the optimal topological structure for electrical energy storage. The unique ordering of lamellae in our dielectric films endue a significantly increased breakdown strength and a reduced leakage current compared to amorphous films. This novel approach of enhancing the capacitive energy storage properties by controlled orientation of lamellae in homopolymer offers a new perspective for the design of high‐temperature polymer dielectrics.

Orienting Electron Fillings in d Orbitals of Cobalt Single Atoms for Effective Zinc–Air Battery at a Subzero Temperature

AbstractThe missions in extreme environments such as the moon, the Arctic/Antarctic, and the plateau require the operation of batteries at low temperatures even below the freezing point of water. Herein, it is reported that compressively stressed Co single atoms exhibit enhanced oxygen reduction reaction (ORR) activity and enable the effective operation of zinc–air battery at a subzero temperature. The compressive strain is generated by depositing Co single atoms on highly arced carbon layers with ultra‐small curvature radii ≈2 nm. The locally compressive strain on Co single atoms redistributes the electron fillings in d orbitals with different spatial orientations, thereby strengthening the adsorption of active intermediates and enhancing the activity toward ORR. As expected, compressively stressed Co single atoms outperform Co single atoms on a flat support without strain in terms of kinetic current density (31.09 mA cm−2 vs 0.35 mA cm−2) at 0.85 V during ORR. The integration of the catalyst into a Zn–air battery generates a superior power density of 54.8 mW cm−2 than the commercial Pt/C counterpart (24.1 mW cm−2) at −40 °C.

Research on the equivalent impact test method for different pulse widths based on micro-electro-mechanical system devices

The impact pulse width generated by kinetic weapons during launch differs significantly from that produced by conventional laboratory overload impact methods. Consequently, there is an urgent need to develop a method for evaluating the equivalent impact between overload environments characterized by different pulse widths. In the Hopkinson Bar overload test environment, this study presents a method for performing equivalent impact tests based on the Sum of Effective Impact Energy for micro-electromechanical system acceleration sensors, in accordance with the impact dynamics theory and the law of energy variation. It establishes an equivalent impact model for inertial loads with different pulse widths. The dynamic response of the accelerometer to various impact loads was evaluated through the Hopkinson Bar overload test and live firing test, with an error margin of less than 10 %. Timely guidance can be provided for selecting overload parameters in dynamic impact testing, thereby advancing the engineering process of simulating extreme overload environments.

Simulating Tree Root Water Uptake in the Frame of Sustainable Agriculture for Extreme Hyper-Arid Environments Using Modeling and Geophysical Techniques

In order to ensure sustainability in the agricultural sector and to meet global food needs, a particularly important challenge for our time is to investigate the possibility of increasing agricultural production in areas with extreme hyper-arid environments. Warming air temperatures and sandy soils significantly influence tree root water uptake (RWU) dynamics, making accurate estimation of RWU depth distribution and magnitude crucial for effective resource management, particularly in the context of precision irrigation within agroecosystems. This study employed two non-invasive techniques, namely HYDRUS 1D and electrical resistivity tomography (ERT), to simulate RWU under controlled experimental conditions and under an extreme hyper-arid environment. The results revealed that the highest RWU rates occurred during the morning (08:00–11:00). RWU activity predominantly concentrated in the upper soil profile (0–30 cm), and the soil water content in this area was notably lower compared to the deeper soil layers. With increasing temperature, there was a tendency for the RWU zone to shift to lower depths within the soil profile. The findings of this study could have important implications for farmers, providing valuable insights to implement irrigation water management strategies.